Casio Label Printer Kl-p1000 Driver

Pour toute question ou commentaire concernant la version originale de ce document, n hésitez pas à écrire en anglais à Steven Pritchard.

Casio KL-P1000 Download Drivers and Manual

casio label printer kl-p1000 driver

CASIO produces the highest-quality label printers for the home and office.

General QuestionsCan the labels be used in scrap booking. Are they acid free.

What kind of glue or adhesive do the tapes have.

How thick from the surface that it is attached to does the tape stick up.

What is the length of an XR series label tape.

What is the label tape made from.

Is the battery in KL2000 user replaceable.

KL-P1000 or KP-C10 Label printer isn t being detected by PC when I try to print.

What is the temperature range for using label tapes.

Title WriterMy CD or DVD will not work after printing.

What CD s are suggested for the Title Writers.

What can I do about poor quality printing.

I m making an audio CD with lots of music tracks. How can I fit more tracks on a label.

My disc already has pre-printed text. How can I ensure that CW-100 is printing in the correct orientation relative to the pre-printed text.

How do I print on the lower area of the disc.

CW50 isn t being detected when I plug it into USB; PC is asking for a driver. How can I install or reinstall the driver.

I want to print a graphic, but it appears stretched or distorted. How can I fix this.

I receive a message saying the disc title printer is unplugged or turned off.

Can I import . cte file from my old disc title printer software to the newer software used by CW-100.

FeaturesWhat features do the label printers have.

VistaVista Compatibility

If you don t see a question that pertains to your situation, contact us by going here.

Can the labels be used in scrap booking. Are they acid free.

They are acid free.

Although label tape contains acrylic ester as an additive in adhesives, a kind of adhesive tape Sellotape also contains it, and both levels of inclusion are very low to affect the surface of material. Top

What kind of glue or adhesive do the tapes have.

It is an acrylic adhesive. Top

How thick from the surface that it is attached to does the tape stick up.

It is approximately 54-56 micrometers from the top to the bottom of adhesive surface of material which is applied to. Top

What is the length of an XR series label tape.

The length is 28 feet. Sample tapes included with label printers may be shorter. Top

What is the label tape made from.

The tape body is made of PET polyethylene terephthalate. Top

The KL-2000 has a rechargeable battery built in, as well as a memory backup battery.

The memory backup battery is a CR2032, which can be replaced using the procedure found on page 68 of the manual.

The built-in rechargeable battery cannot be replaced by the user. If this battery needs to be replaced, then the unit must be sent to an Authorized Service Center. Top

KL-P1000 or KP-C10 Label printer isn t being detected by PC when I try to print.

First, be sure to download and install the latest version of the FA-B30 software from the Casio Web site. It is recommended that software be installed before connecting the label printer to the PC for the first time.

Connect the Label Printer to the PC s USB port. Be sure the cable is securely connected to both the PC and the Unit. The PC should detect new hardware, and may attempt to automatically install the proper driver.

If automatic installation fails, or you choose to skip automatic installation, then you may see a dialog box with a message prompting you to insert the software disc or specify another location such as a network drive. Do not insert the disc that came with the Label Printer. Instead, point the installer to the C:WindowsSystem32Drivers folder, so that it finds the Klsmsep.sys file. After that, you should be able to print using the FA-B30 software. Top

What is the temperature range for using label tapes.

Although there are some slight differences between tapes of their guaranteed performance, the following is the basic specification.

Operating temperature limit: -5 to 45 C

Storage temperature range: -25 to 65 C Top

My CD or DVD will not work after printing.

The manual suggests burning the CD or DVD before using the Title Writer. However, it is possible that if the CD or DVD player has a weak laser, then it will not read after printing. Try the CD or DVD in another device to test it. Top

What CD s are suggested for the Title Writers. Brand Part Number Type Details Case Maxell 648730

CD-R

CD-RB 700 Gold Shiny Printable 100 Spindle

Spindle   648731 CD-R CD-RB 700 Gold Shiny Printable Jewel Case Jewel Case   648740 CD-R CD-RBS 700 Silver Shiny Printable 100 Spindle Spindle   648741 CD-R CD-RBS 700 Silver Shiny Printable Jewel Case Jewel Case   635027

DVD-R DVD-R Sliver Shiny Printable Jewel Case Jewel Case   635028 DVD-R DVD-R Thermal White Printable Jewel Case Jewel Case   635127 DVD-R DVD-R Siver Shiny Printable 50 Spindle Spindle Case   635128 DVD-R DVD-R Thermal White Printable 50 Spindle Spindle Case   635041

DVD-R DVD-R 1PK

Jewel Case   635031 DVD-R DVD-R Plus 1PK Jewel Case   635042 DVD-R DVD-R 5PK Jewel Case   635045/635049 DVD-R DVD-R 10PK Jewel Case   635035 DVD-R DVD-R 15 SPINDLE Spindle   635020 DVD-R DVD-R 20PK Jewel Case JVC

VD-R47EU5

DVD-R DVD-R 10mm Jewel Case 10PK 8x speed Jewel Case   VD-R47DU5 DVD-R DVD-R 10mm Jewel Case 10PK 4x speed Jewel Case   VD-R47DU5V DVD-R DVD-R Movie Case 5PK 4x speed Movie Case   VD-R47DU10 DVD-R DVD-R 5mm Slim Jewel Case Color Mix 10PK 4x speed 5mm Jewel Case   VD-R47DU30S DVD-R DVD-R Spindle Case 30PK 4x speed Spindle   VD-W47EU5

DVD-RW DVD-RW 10mm Jewel Case 5PK 4x speed

Jewel Case   VD-W47DU5 DVD-RW DVD-RW 10mm Jewel Case 5PK 2x speed Jewel Case   VD-W47DU5V DVD-RW DVD-RW Movie Case 5PK 2x speed Movie Case   VD-W47DU10 DVD-RW DVD-RW 5mm Slim Jewel Case Color Mix 10PK 2x speed Slim Jewel Case   VD-M47EU5

DVD-RAM DVD-RAM 10mm Jewel Case 5PK 3x speed

Jewel Case   VD-M47DU5 DVD-RAM DVD-RAM 10mm Jewel Case 5PK 2x speed Jewel Case   VD-M47DU5V DVD-RAM DVD-RAM Movie Case 5PK 2x speed Movie Case   VD-M47DU10 DVD-RAM DVD-RAM 5mm Slim Jewel Case Color Mix 2x speed Slim Jewel Case   VP-R47EU5

DVD R DVD R 10mm Jewel Case 5PK 8x speed

Jewel Case   VP-R47DU5 DVD R DVD R 10mm Jewel Case 5PK 4x speed Jewel Case   VP-R47DU5V DVD R DVD R Movie Case 5PK 4x speed Movie Case   VP-R47DU10 DVD R DVD R 5mm Slim Jewel Case Color Mix 10PK 4x speed 5mm Jewel Case   VP-R47DU30S DVD R DVD R Spindle Case 30PK 4x speed Spindle   VP-W47DU5

DVD RW DVD RW 10mm Jewel Case 5PK 4x speed Jewel Case   VP-W47DU5V DVD RW DVD RW Movie Case 5PK 4x speed Movie Case   VP-W47DU10 DVD RW DVD RW 5mm Slim Jewel Case Color Mix 10PK 4x speed Slim Jewel Case

Inkjet printable disks are not compatible with the Title Writer. Top

What can I do about poor quality printing.

Some CD-R discs are more suitable for printing than others. It all depends on the printing surface. See the list of recommended discs for more information. Top

I m making an audio CD with lots of music tracks. How can I fit more tracks on a label.

First, choose a print pattern that will print field 1 and field 2 with a rectangular layout not curved or fan layout. By default, field 1 will contain the CD title and the artist name, and field 2 will contain up to six lines to list the music tracks.

Select the Text Layout icon, and choose a layout that allows you to show two tracks per line instead of just one. By doing this, you should be able to fit 12 tracks in the lower field.

Sometimes, you might need even more than 12 tracks on a label. In that case, try using one or more of the following modifications to free up space from field 1, which will then be utilized for listing more tracks:

1. Eliminate the tile and/or artist name from the label. To do this, just leave the input box blank, and it won t be printed. Completely eliminating both of these will enable you to list up to 24 tracks.

2. Reduce the font size of the title or artist name.

3. If both the title and artist names are short enough, consider combining them onto a single line in the Title input box, while leaving the Artist Name input box blank.

Remember that you can preview your work on the screen before printing. Click the magnifying glass icon to get a more readable version of both fields.

Top

My disc already has pre-printed text. How can I ensure that CW-100 is printing in the correct orientation relative to the pre-printed text.

When you issue the print command, the CW-100 will eject the disc tray and prompt you to insert the disc. The program will show a dialog box similar to the below picture. This dialog box has an illustration of the printer, and a disc with pre-printed text and an rectangular outline showing you where the first print area is going to print. Be sure to pay attention to where the rectangle is, as the position could vary depending on your print layout.

How do I print on the lower area of the disc.

The disc has two print areas--an upper area and a lower area. If you have entered information to be printed using the software, and there is a lot of information, some of it may go into the lower area. For example, on a music CD, the printer may print the title and the artist on the upper area, and a list of songs on the lower area.

When you go to print, the unit will print the upper area, and then stop. At this point, a message should appear on the PC screen prompting you to rotate the disc 180 degrees. After doing this, close the tray, and it will then proceed to print the lower area. Top

CW50 isn t being detected when I plug it into USB; PC is asking for a driver. How can I install or reinstall the driver.

You need to install the software that was included with the CW-50. Please follow the below steps:

CW50 CD Label Printer Installation Instructions

CW-50 Installation on Windows98/ME

1 Install label printer software

2 Install printer ribbon

3 Remove card board spacers by ribbon

4 Connect power cable

5 Connect USB cable to PC and then to Printer

6 PC will display New Hardware wizard

7 Click NEXT

8 Allow the PC perform an Automatic Search

9 PC will locate multiple drivers on the Casio CD

10 Select the driver on the CD in the Driversw9xcw50.inf

11 Continue installation to FINISH

If no driver found, go to My Computer and then, Tools Folder Options View.

Make certain that Show ALL files or Show Hidden Files is selected.

At this point repeat the above procedure until the driver is found.

CW-50 Installation on Windows2000/XP

12 Install label printer software

13 Install printer ribbon

14 Remove card board spacers by ribbon

15 Connect power cable

16 Connect USB cable to PC and then to Printer

17 PC will display New Hardware wizard

18 Click NEXT

19 Allow the PC to perform an Automatic Search

20 PC will locate multiple drivers on the Casio CD

21 Select the driver on the CD in the Driversw2kcw50.inf

22 Continue installation to FINISH

At this point repeat the above procedure until the driver is found. Top

I want to print a graphic, but it appears stretched or distorted. How can I fix this.

Click the image icon to open the Image Settings window. You will see a check box labeled Maintain aspect ratio. If this box is not checked, then the software will stretch the graphic to fit the print field. If this box is checked, then the graphic will appear at its original aspect ratio in other words, not stretched or distorted.

The Image Settings window also acts as a preview for this feature. After you select a graphic, you can check or uncheck the Maintain aspect ratio box and immediately see what the graphic would look like when it is printed. Top

I receive a message saying the disc title printer is unplugged or turned off.

Please try the following procedure.

1. On your PC, open Device Manager. To do this, go to Start, then click Control Panel, then double-click the System icon. Depending on the version of Windows you are using, there may be a Device Manager tab, or a Hardware tab with a button labeled Device Manager.

2. Look for any device that has an icon with an exclamation point . . You may find this under Other Devices USB Device.

3. Double-click that device, select the Driver tab, and then select Update Driver.

4. Allow the system to automatically search for and install the driver.

5. Click FINISH when complete.

After doing the above procedure, retry printing. Top

Can I import . cte file from my old disc title printer software to the newer software used by CW-100.

Yes, this is possible. Open the DISC TITLE PRINTER for CW-100 program, go to the File menu, select Import, then select the Import TITLE PRINTER Data 1 command. Top

What features do the label printers have.

Click here to download this spreadsheet with information on the features. Top

Vista Compatibility

Please go to the following page for information on Windows Vista compatibility:

Only 32-bit Windows Vista is supported. There are no software or drivers available for 64-bit versions of Windows Vista. Top.

Devices and interfaces. Please keep sorted. Syntax: vendor vendor_name device device_name -- single tab interface interface_name.

Company

Casio

Categories

Printers

Model

Casio KL-P1000

Description

PC Label Printer Application FA-B30

Operating Systems

Windows 98-98Se-Me-2000-XP

Version Driver

Ver.1.02

Size Driver

5.37Mb

File Name

b30up102000e.exe

Info

The software being offered here is an upgrade for the PC LABEL PRINTER application FA-950, which is part of the CASIO USB Peripheral Series.

Be sure to read all the following information carefully before performing the download and using the upgrade.

Applicable Printer: CW-L300/KP-C10/KP-C50/KL-P1000

Version details

Ver1.02 for Windows XP,2000 Professional,Me,98SE,or 98

Ver1.03 for Windows 7 / Windows Vista 64/32bit NEW

To download the upgrade

1. Click the B30up102000E.exe, FAB30_103000E.exe or FAB30_103000_x64E.exe download file name below.

2. On the file save dialog box that appears, specify the folder where you want it to be saved, and then click the Save button. This downloads a self-extracting file to your computer.

To install the upgrade

1. If an older version of PC LABEL PRINTER application is installed, please uninstall beforehand.

2. Quit all other applications that are running on your computer.

3. On the Start menu, click Run.

4. Click the Browse button, and then use the dialog box that appears to select the file you downloaded B30up102000E.exe, FAB30_103000E.exe or FAB30_103000_x64E.exe.

5. Click the Open button, which returns to the Run dialog box.

6. Click OK to start installation upgrade.

7. After installation of the upgrade is complete, follow the instructions that appear and restart your computer.

Terms and Conditions of Use

Use of this upgrade software is allowed subject to the following terms and conditions. Should you feel that you cannot observe any of the following terms and conditions for some reason, please do not use this upgrade software.

1. You agree to use this software only on the printer model indicated by the Applicable Printers item above.

2. You agree not to re-distribute this upgrade software in any form.

3. You agree not to attempt to modify, improve, reverse engineer, decompile or disassemble this upgrade software.

4. You are not allowed to change any of the copyright markings on this upgrade software in any way.

5. CASIO COMPUTER CO., LTD. shall not be held liable for any losses arising out of the use of this upgrade software.

6. You agree to download, install, and use this upgrade software at your own risk.

Important.

1. Operation of this upgrade software is not supported under Windows 3.1, 95, XP Professional x64 Edition, or the Macintosh.

2. Operation of this upgrade software is not supported on an operating system that has been upgraded from a previous version.

3. The application may not be able to run correctly on certain system hardware and software configurations.

4. Be sure to read all of the other software precautions and other information that accompanies the upgrade software.

5. Ver.1.03 on Windows 7/Windows Vista : There is the following restrictions.

-Help does not display. For details, click here.

-Capturing function does not work properly at Windows Aero mode on display.

-No animated function at printing on the software.

-On Windows 7 64bit or Windows Vista 64bit, Importing screen text into a label function does not work properly.

  • The software being offered here is an upgrade for the PC LABEL PRINTER application FA-950, which is part of the CASIO USB Peripheral Series. Be sure to read all the.
  • Frequently Asked Questions - Label Printers General Questions Can the labels be used in scrap booking. Are they acid free.
  • DriverTuner was created to save your time resolving driver problems by providing you with a single, automatic tool.
  • Cassiopeia Devices Download Now. Pocket PC 2002 Update Pack 3.00; Gapi 1.2.zip; Schedule Viewer.zip; Update Pack Version 1.04; UpdatePack Ver300sER.zip;.
  • Provedor LocalNet Telecom. Internet banda larga via rádio - Internet banda larga via fibra óptica. Registro de domínios - Hospedagem de sites.

Casio - Support